|
|
AK4682
48kHz/192kHz，2声道ADC和4声道DAC配有输入选择器及2Vrms I/O
| The AK4682 is a single chip CODEC that includes two channels of ADC and four channels of DAC. The ADC outputs 24bit data and the DAC accepts up to 24bit input data. The ADC has the Enhanced Dual Bit architecture with wide dynamic range. The DAC introduces the new developed Advanced Multi-Bit architecture, and achieves wider dynamic range and lower out-band noise. The AK4682 integrates stereo selector supporting 2Vrms I/O. The AK4682 has a dynamic range of 96dB for ADC, 102dB for DAC and is well suited for digital TV and home theater system. |
 |
- Application: AV Amp, DVD Receiver, Mini-Component Stereos, Digital TV
- ADC/DAC part
 · Asynchronous ADC/DAC Operation
· 8:1 Stereo Selector for ADC Input
· 8:3 Stereo Selector with 2Vrms Output Buffer
· 2ch 24bit ADC
- 64x Over Sampling
- Sampling Rate up to 48kHz
- Linear Phase Digital Anti-Alias Filter
- Single-Ended Input
- S/(N+D): 88dB
- Dynamic Range, S/N: 96dB
- Digital HPF for Offset Cancellation
- Channel Independent Digital Volume (+24/-103dB, 0.5dB/step)
- Soft Mute
· 4ch 24bit DAC
- 128x Over Sampling
- Sampling Rate up to 192kHz
- 24bit 8 times Digital Filter
- S/(N+D): 86dB
- Dynamic Range, S/N: 102dB
- Channel Independent Digital Volume (+12/-115dB, 0.5dB/step)
- Soft Mute
- De-emphasis Filter
- Output Mode: Stereo, Mono, Reverse, Mute
· High Jitter Tolerance
- TTL Level Digital I/F
- External Master Clock Input:
- 256fs, 384fs, 512fs
- 2 Audio Serial I/F (PORTA, PORTB)
· Master/Slave mode (for PORTB)
· I/F format
PORTA: Left/Right (20/24 bit) justified, I2S, TDM
PORTB: Left/Right (20/24 bit) justified, I2S
- I2C Bus µP I/F for mode setting
- Operating Voltage:
- Digital I/O: 2.7V ~ 5.25V,
- Analog: 4.75V ~ 5.25V and 8.5V ~ 12.6V
- 48pin LQFP Package (0.5mm pitch)
- Evaluation Board: AKD4682
|
AK4682 BLOCK DIAGRAM
Data Sheet PDF
|
Data Sheets
Rev. MS0610-E-01 2007/07
PDF : 674KB / 43pages
|
|
Evalution Board Manual
Rev. KM086400 2007/02
PDF : 1375KB / 40pages |
|
|
